| |
| |
Precise - Robust - Reflectorless: 
 | Multi-Bus
| | Measuring distances with millimeter accuracy
| | Accurate Positioning
| | Motion detection / Contour detection
| | Level gauging
| | Measures surfaces up to 1250 °C
| | Width measurement without additional equipment |
The LMC-J-0050-x is an opto-electronic distance measuring module for industrial application. The device uses a contact less measurement technique based on comparative phase measurement with amplitude modulation. The laser diode has a divergence of 0.6 mrad for measurement with pinpoint accuracy.
The measurement data is available through different interfaces for further processing. A digital switching output and an analogue output (4..20mA) are also available. The sensor alignment can easily be achieved using the red laser spot.
The sensor is built in a IP 66 housing which is made for heavy industry area. It includes a special dust protection chamber, which keeps the sensor window much longer clean. As ad on, water cooling and air purge nozzles are available. A heat filter is already built in.
It comes including a spring cushioned three point bracket for easy and safe installation. 2 different base plates for horizontal and vertical installation are available. Technical Datas| Measuring range: | 0.2 to 35 m on any natural surface, up to 150m (depending on target reflectivity, stray light influences and atmospheric conditions). | | Repeatability: | ≤ ± 0,4 mm on whole measuring range | | Absolute Measuring accuracy: | ±2 mm | | Measuring resolution: | depending on scaling factor (SF1 = 1.0 mm; SF10 = 0.1 mm; SF1000 = 0.001) | | Measuring rate: | 1 Hz…5 Hz, 10 Hz, 50 Hz | | Laser divergence: | 0.6 mrad | | Laser classification: | ≤ 1 mW under IEC 825-1, laser class 2 (red light) | | Operating temperature: | -10 °C to +60 °C, (+100°C with Water cooling, -40°C with Heating) | | Supply voltage: | 10 V to 30 V DC, <1,5 W (without IAlarm) | | Phys. dimensions: | 250 x 90 x 110 mm (L x W x H) | | Weight: | About 4000 g | | Protection class: | IP 66 |
| Type | Interface | Additional Specification | Optional | | LMC-J-0050-1 | RS232/422, 4-20mA, 1 switching out, 1 trigger in | | | | LMC-J-0050-1M | RS232/422 at same time, 4-20mA, 3 switching out, 1 trigger in | 50Hz | | | LMC-J-0050-2 | RS232/422, 4-20mA, 1 switching out, 1 trigger in | 50 Hz | | | LMC-J-0050-3 | ProfiBus DP, SSI, 4-20mA, 2 switching out | 50 Hz | | | LMC-J-0050-4 | EtherNet, 4-20mA, 1 switching out, 1 trigger in | Webserver | 50 Hz, 4 I/O | | LMC-J-0050-5 | WLAN, 4-20mA, 1 switching out, 1 trigger in | Webserver | 50 Hz, 4 I/O | | LMC-J-0050-6 | Bluetooth, 4-20mA, 1 switching out, 1 trigger in | | 50 Hz | | LMC-J-0050-7 | CANopen | | 50 Hz | | | | | | | LMC-J-0070 | RS232/422/485, SSI, CAN 2.0 | up to 1000 Hz | |
Options: | Exchange window
| | Double long front tube (better dust and spray material protection)
| | Plug versions
| | Water cooling for environmental temp. up to 100°C
| | Heat shield
| | Air purge
| | Built in heater for environmental temp. down to -40 °C,
| | 3 switching outputs
| | Master- slave configuration (EtherNet and WLan Version only)
| | Custom made outputs, interfaces and housings |
Bracket Types and Dimensions:Type A (standard) Type B
|
|
|
